4K SEAL KIT SHAFT STD/WHL
CHAR-LYNN 6000 SERIES REAR KIT
104-1420 CHAR-LYNN. HYDRAULIC MOTOR, EATON CHAR-LYNN () 2000 SERIES, 29.8 IN3 DISPLACEMENT, 2 BOLT SAE A MOUNT, 1-1/4" KEYED SHAFT, #10 ORING STAGGERED PORTS.
CHARLYNN COMPRESSION SPRING
S SERIES, 13.7 IN3 DISPLACEMENT, 4 BOLT, 1-3/4" PILOT, 1" KEYED SHAFT, #10 SAE ORING PORTS
129-0003
HYDRAULIC MOTOR, J SERIES, 1.21 IN3 DISPLACEMENT, 5 BOLT MOUNT PATTERN, 5/8" KEYED SHAFT, #6 SAE ORING REAR PORTS
Hydraulic Motor 103-1037-010
Direct Replacement for Eaton Char-Lynn S-Series Motors
S SERIES BUNA REPAIR KIT 012 DESIGN
10K SERIES SHAFT SEAL KIT. DESIGN CODE 002-003-004
2K VALVE PLATE
(REMAN)
10K VALVE PLATE
[REMAN]
103-1035-012
93 cm3/r (5.7 in3/r) Displacement | 15 GPM Continuous Flow (20 GPM Inter)
607 RPM Maximum Speed | 1,623 in-lbs Continuous Torque (1,992 in-lbs Inter)
2-Bolt Flange Mount |1.00" Keyed Shaft |#10 ORB
10K BALANCE RING (REMAN)
COMPLETE SEAL KIT 4K, BEARINGLESS MOTOR KIT
CHARYLNN 2000 SERIES BALANCE RING (REMAN)
CHAR-LYNN 2000 SERIES DRIVE VALVE (REMAN)
CHAR-LYNN 211/212/241/261 SERIES SEAL KIT
CHAR-LYNN 2000 SERIES REPAIR KIT
CHAR-LYNN 6000 SERIES FRONT END SEAL KIT
CHAR-LYNN 4000 SERIES FRONT KIT
CHAR-LYNN 4000 SERIES REAR KIT
CHAR-LYNN 101 SEAL KIT COMPLETE BUNA -008/9
2000 SERIES / 194.8 CM3/R [11.89 IN3/R] / WHEEL, 4 BOLT; 108.0 [4.25] PILOT DIA. / 31.75 [1.250] DIA. .125;1 TAPERED SHAFT
2000 SERIES / 306.6 CM3/R [18.71 IN3/R] / 75 [1.250] DIA. STRAIGHT SHAFT / STANDARD, 2 BOLT; 82.6 [3.25] PILOT DIA
104-1024 CHAR-LYNN. HYDRAULIC MOTOR, EATON CHAR-LYNN () 2000 SERIES, 8.0 IN3 DISPLACEMENT, 2 BOLT SAE A MOUNT, 1-1/4" KEYED SHAFT, #10 ORING STAGGERED PORTS.
